Early 2017 we took some new cellular boosters out on the road to collect field readings.
The cellular boosters tested:
- weBoost Drive 4G-X - our tried and true standard, based on two previous rounds of signal testing. We'll be testing it both with the 4" Mag Mount and 4G-OTR antennas.
- Maximum Signal Max-Amp Mobile - we only got two locations tested with the 3rd replacement unit Maximum Signal sent us after several unsuccessful tests. We'll be giving it a last shot of living up to its claims.
- Smoothtalker Mobile X6 - Released in early January 2017 we'll be testing this new 5-band booster.
- HiBoost Travel 4G - We'll also be testing this newer mobile booster to the market.
- weBoost 4" Mini MagMount "Stubby" (301126) - Default antenna bundled with the Drive 4G-X booster. For antenna only testing, we use two of these for a MIMO configuration - plugging one into each antenna port of the mobile hotspot.
- MobileMark 4-In-1- A high-end low-profile MIMO antenna provided by 3GStore
For guides to boosters & antennas:
Understanding & Optimizing your Cellular Data Performance (new member exclusive guide, based in part on the results of this testing round.)
Our testing procedures:
During our testing, we visited a variety of locations and set up our gear for head-to-head comparison.
We start by taking 3 baseline readings with each of our cellular devices with no booster or antenna.
Each device is tested independently, with all other nearby devices in airplane mode to prevent any potential interference.
Next, for each device we test each booster and/or antenna combination.
The devices & the carriers we are testing them with include:
- Verizon - Netgear AC791L & Novatel 7730L (starting Feb 11)
- AT&T - Unite Explore (primary) and Home Base
- T-Mobile - ZTE Falcon Z-917
- Sprint - Netgear Fuse
The readings taken are:
Coverage? Map snapshot, showing high level view of anticipated service at each location.
- Signal strength db reading, on devices that support it using Field Test mode.
- Signal bars/dots present & service type - HSPA, LTE (and specifically which band, when possible), 3G, 1XRT, Edge, etc.
- DL = Download speed.
- UL = Upload speed.
- Ping time.
- SNR or Quality - Signal to Noise Ratio, if reported by device.
- Calculated scores.
For speed and ping readings, we are using the Ookla Speedtest app. We take the readings directly on device - on our smartphones & tablets. When testing mobile hotspots we test on one of our iPads while connected via WiFi to the hotspot.
Each testing location will take about 8-12 hours to complete and will burn through a good chunk of data. It was a very time intensive process to collect the raw data displayed below.
All of the individual field testing results and observations shared below are for our members. Not only will the results show the performance of each booster/antenna, but also what to expect in different types of signal situations.
Our goal in our cellular and Wi-Fi gear testing isn’t to attempt to create perfectly “fair” lab conditions, which are impossible in the real world. Instead, we try to strike a balance between real-world scenarios and the need to be able to test multiple setups head-to-head while being able to rapidly switch between them.
By testing in a range of locations and situations patterns tend to emerge - and we always try to sanity-check our conclusions by mixing things up to make sure that the overall results make sense and are representative.
Testing Status: On March 1, 2017 we wrapped up our final testing location and have now integrated our experiences into our product guides in the Cellular Booster Review Center (general overview & ratings available to all, our in-depth reviews are member exclusive).
Members also have access to our fielding testing results and general findings below, including a video comparing all of the configurations we tested in this round.
We also released a brand new extensive guide and video for members:
If you're a member, please log in above to access the exclusive portions of our content.
We are honored to be able to present a bunch of our content for free.
Our resource center is brought to you by funding from our premium members. We don't accept 3rd Party Advertising, we're not sponsored and we don't sell stuff.
Our members have exclusive access to in-depth content, classrooms, discounts, alerts, insider info and interactive guidance.
If mobile internet is an important part of your lifestyle, you can help make this possible:
Explore the Resource Center
Join our 'Library Desk':
Internet for RVers & Cruisers Facebook Group
We cross post news articles and guides, and can help point you in the right direction to our content here on the resource center.
It is with gratitude to our premium members that we're able to offer our free content - and for that, they also have access our private Q&A areas for more in-depth guidance.
Become a Member
The MIA is our premium membership - designed for those who consider mobile internet an important part of their lifestyle.
In thanks for making content like this possible, we offer a bunch of additional perks. From interactive guidance, in-depth member exclusive content, discounts, alerts, classroom and more.
Become a Supporter
We totally understand that a membership isn't right for everyone.
However you can still support this content with our supporter level for just $25/year.
With our gratitude, you'll get access to all our free content without the 'nags'.